Thread Stuck in Device Driver Error Fixed Windows 7/8/8.1 &10

Thread Stuck in Device Driver Error: You may get Thread Stuck in Device Driver Error in Windows 7/8/8.1 and 10 especially after when you are turning on your computer or after few minutes of turning on. If you are installing any Driver, updates or operating system also you might get such error. Because Thread Stuck in Device Driver Error is related to driver.

Thread Stuck in Device Driver Error

It does not matter which OS you are using. Thread Stuck in Device Driver Error may arise in Windows 7/8/8.1 as well as Windows 10 also.

Thread Stuck in Device Driver Error

There may be several reasons behind Thread Stuck in Device Driver Error. Some of the reasons are listed below.

Also Read :

Thread Stuck in Device Driver Error

  • Bad device driver
  • Misconfiguration of the device driver.
  • If device driver is not updated
  • Driver must be compatible.
  • Due to overheating of the computer system.

Steps To fix Thread Stuck in Device Driver Error

Method -1

##Basic Steps to resolve Thread Stuck in Device Driver Error

Whenever you are getting any such issue, then make sure that your system is in a healthy state. Here are some basic steps that you should follow.

  • Your computer should have sufficient space. So that rebooting may resolve some of the problems.
  • Always installed the softwares In your computer those are compatible with it.
  • It is also important to determine whether correct driver/drivers are installed for devices.

Method – 2

##Update Drivers

 Whenever you are getting an error, always try to figure out which device caused the error. That means
which device you were using when this error occurred. So once you know which deice it is, you can easily check its driver and update it. Because that may be causing an error.
  • Open Device Manager and search your computer.
  • It will show you a list of all Hardware that is associated with your computer. Expand them all.
  • Here you can check if any device is there with Yellow Triangle with Black Exclamation mark.
  • If you are getting any such device, then just right click on that to update that.
  • Now restart your computer. Check whether the error is resolved or not.

Method – 3

## Replace The Device

This method you can execute if you guess that error is for any faulty or damaged the device.

  • First of all turn off your computer.
  • Remove all peripheral devices of your computer like printers, video card, scanner, graphics card, sound card, etc.
  • Now start your computer and check whether error persists or not.
  • Thread Stuck in Device Driver Error is due to one or several faulty devices.
  • So replace each device one after another, shut down and again restart to identify the faulty device.

This method takes comparatively more time. But it will give you the real reason behind the cause of the error. So take your own time, and solve the error.

Method – 4

## Temperature Control

Overheating is a major cause of various computer errors. Your video card, in particular, can be affected by overheating. The card’s chipset easily locks up when the card is overheated. It is, therefore, very necessary that you keep your computer cooled.

Both the fans and UPS should be clean and be functioning properly. Note that it may become necessary to upgrade the UPS in case it is old enough.

Overheating can be a severe problem for various error. Overheating can put a severe effect on video card especially. When the video card is overheated, card’s chipset is easily locked up. So it is very important to keep your system always cool.

To control the temperature of your computer, always make sure to clean the fans and UPS. If they are functioning properly then try to replace them with a new one.

Thread Stuck in Device Driver Error

Speak Your Mind